CPVC Slip X Slip Stop Valve

A CPVC slip x slip stop valve is a crucial plumbing component used to control water flow in residential, commercial, and industrial piping systems. Its slip x slip connection allows for easy solvent-welded installation with CPVC pipes, providing a strong, leak-free joint. CPVC (Chlorinated Polyvinyl Chloride) is highly resistant to corrosion, scaling, and chemical damage, making it ideal for potable water, hot water, and chemical applications. This valve is widely used where a compact, durable, and reliable shut-off solution is required.IFAN factory 30+ years manufacture experience support color /size customization support free sample.Welcome to consult for catalog and free samples.This is our Facebook Website:www.facebook.com.

A slip x slip stop valve is a shut-off valve that uses slip (socket) connections on both ends, allowing the valve to be joined to CPVC pipes using CPVC solvent cement. Unlike threaded or compression valves, slip x slip valves create a permanent, strong, and leak-proof bond when properly installed.

Key features include:

CPVC Body: Durable, corrosion-resistant, and lead-free for safe drinking water.

Slip x Slip Connection: Solvent-welded installation for a strong and permanent joint.

Quarter-Turn or Multi-Turn Options: Allows easy water shut-off and flow control.

Compact Design: Suitable for tight spaces and direct pipe alignment.

CPVC material withstands corrosion, rust, and mineral scaling, ensuring a long service life. Its resistance to chemicals also makes it ideal for industrial water applications.

The solvent-welded slip x slip connection creates a strong bond that minimizes the risk of leaks compared to threaded or compression fittings.

Lead-free CPVC valves maintain water quality, making them suitable for residential drinking water systems, kitchens, and bathrooms.

Continuous working temperature: up to 82°C (180°F)

Short-term peak temperature: up to 93°C (200°F)

Maximum working pressure: typically 10–25 bar depending on manufacturer specifications

The slip x slip design allows for simple alignment with existing CPVC piping, reducing installation complexity and labor costs.

Used in water supply lines to sinks, toilets, showers, and water heaters, providing reliable shut-off for maintenance or emergencies.

Ideal for hotels, offices, and restaurants where localized shut-off valves improve maintenance efficiency without disrupting the entire system.

Compatible with both hot and cold water, providing versatile operation in diverse plumbing setups.

Suitable for systems requiring chemical resistance and durable shut-off capabilities, such as laboratories or processing plants.

Turn Off Water Supply: Always shut off the main line before installation.

Cut and Prepare Pipe: Measure and cut the CPVC pipe to the correct length, removing burrs.

Apply Primer and Solvent Cement: Coat both the pipe and valve socket with CPVC primer and solvent cement.

Insert Pipe into Valve Socket: Push the pipe fully into the slip socket, ensuring correct alignment.

Hold and Cure: Hold the pipe in place for a few seconds to allow the cement to bond. Allow the joint to cure according to manufacturer recommendations.

Test the Valve: Slowly restore water pressure and operate the valve to ensure proper flow and no leaks.

Inspect periodically for leaks, cracks, or signs of wear.

Operate the handle occasionally to prevent stiffness or seizing.

Avoid excessive force during installation or operation to prevent damage to the CPVC body.

Clean mineral deposits or debris from older water systems to maintain optimal performance.

The CPVC slip x slip stop valve provides a reliable, durable, and safe solution for modern plumbing systems. Its slip x slip solvent-weld connections, corrosion-resistant CPVC construction, and easy operation make it ideal for residential, commercial, and industrial applications. Proper installation and routine maintenance ensure long-lasting, leak-free performance, offering efficient water control and improved system reliability for any plumbing project.