1. The heating should be gradual when using for the first time;
When using geothermal floor, consumers must pay attention to heating the floor and floor step by step. During installation, the surface temperature should be kept around 18°C. Before installation, the cement floor should be gradually heated up by 5°C every day until it reaches the standard of about 18°C. This temperature should be maintained for the first 3 days after installation, after which the temperature can be increased as needed, and only 5°C per day.
When using geothermal heating for the first time, pay attention to heating up slowly. When using it for the first time, the temperature should be gradually increased for the first three days: the water temperature is 18°C on the first day, 25°C on the second day, 30°C on the third day, and can be raised to normal temperature on the fourth day, that is, the water temperature is 45°C, and the surface temperature is 28°C. ℃～30℃. Don't heat up too fast, too fast, the floor may crack and twist due to expansion.
When the geothermal heating system is activated again after a long period of time, it is also necessary to strictly follow the heating program as it was used for the first time.
2. The surface temperature should not be too high;
It should be noted that when using geothermal heating, the surface temperature should not exceed 28 °C, and the water pipe temperature should not exceed 45 °C. If this temperature is exceeded, it will affect the service life and cycle of the floor. The average family is very comfortable when the room temperature reaches about 22 ℃ in winter. If the temperature rises normally, it will not affect the use of the geothermal floor.
3. Turn off the geothermal system, and pay attention to gradual cooling;
With the passage of the season, when the weather warms up and the indoor heating of the geothermal system is no longer needed, it should be noted that there is also a process to turn off the geothermal system, and the cooling process of the floor should also be gradual and not drop abruptly. If the cooling speed is too fast, It will also affect the life of the floor.
4. When the room is too dry, humidification can be considered;
In winter, the climate is dry, coupled with the use of geothermal heating, the floor is easy to dry and crack under the condition of high temperature for a long time. At this time, it is necessary for the owner to humidify the room to prevent the floor from cracking and deforming.
When decorating, be careful not to drill holes and nails on the ground, so as not to leak the geothermal pipeline, causing the geothermal system to run out of water and the floor to soak in water and be scrapped. In addition, since the surface of the floor is a heat dissipation surface, try not to make fixed decorative parts or place furniture without legs on the floor, and it is not suitable to build a platform, so as not to affect the flow of hot air, resulting in poor room heating effect.
Due to the high surface temperature of the floor, it is best not to place glassware and porcelain with water directly on the ground in winter in the room using the geothermal heating system, so as to avoid uneven heating, thermal expansion and contraction, resulting in the rupture of the utensils, and the home "water is full of gold" .
Geothermal floor has become a fashionable decoration in home decoration, but everyone must pay more attention to details when purchasing and paving, especially in terms of maintenance, the requirements of geothermal floor are higher.