Before starting installation, the working environment needs to be clean and well organized. Pipes and fittings should be stored in a dry area away from direct sunlight and heavy impact to avoid surface damage.
Measuring tools, cutting equipment, and welding tools must be checked in advance to ensure smooth workflow. Proper preparation reduces delays and helps maintain accuracy during the entire installation process.
| Product Name | IFAN PPR Stainless Steel Pipe |
| Color | Green/ White/Gray /Blue/ Yellow or customized |
| Size | 20-63mm |
| Pressure | PN25 |
| Material | PPR & Stainless Steel (100% new material) |
| Certificate | CE/ISO9001,etc. |
| Brand | IFAN/OEM/No Brand |
| Sample | Free (Click Here to Contact Us and Get Free Samples) |
Measuring and Cutting the Pipe
Accurate measurement is essential for a stable plumbing layout. Each section should be measured according to the system design before cutting begins.
A dedicated pipe cutter is recommended to ensure clean and straight edges. Smooth cutting helps improve connection quality and reduces the risk of leakage at joint points during system operation.
Surface Cleaning and Preparation
After cutting, both pipe ends must be cleaned to remove dust, oil, or debris. Any contamination can affect the quality of the joint and reduce sealing performance.
A dry cloth is usually sufficient for surface cleaning. In some cases, light sanding may be used to ensure proper bonding during the joining process.
Heating and Fusion Process
Connection is typically achieved using heat fusion methods. The pipe and fitting are heated using a specialized welding tool until the material reaches a soft state.
Once the correct temperature is achieved, both parts are quickly joined and held in place. This process creates a strong and uniform bond that becomes part of the continuous pipeline system.
Alignment and Connection Control
Proper alignment is critical during the joining stage. Misalignment can lead to stress points and reduce long-term system stability.
Each connection should be checked before cooling begins. Holding the pipe steady during the setting period ensures a tight and reliable joint structure.
Cooling and Stabilization
After fusion, the joint must be left undisturbed until it fully cools. Cooling time depends on pipe size and environmental conditions.
During this stage, the connection solidifies and gains full strength. Premature movement can weaken the bond and affect long-term performance.
System Layout and Fixing
Once individual sections are connected, the pipeline should be fixed using appropriate supports. Proper spacing helps prevent sagging and reduces stress on joints.
Supports should be installed at regular intervals depending on pipe diameter and system design. This ensures stability during both installation and long-term operation.
Pressure Testing Before Use
Before the system is put into operation, pressure testing is required. This step helps identify any weak points or installation errors.
Water or air pressure is applied to the system for a set period. If no leakage or pressure drop is observed, the installation is considered successful and ready for use.
Final Inspection and Completion
A final inspection should be carried out to confirm that all joints are secure and the layout follows the design plan. Any loose fittings or misaligned sections should be corrected before system activation.
Proper documentation of the installation process is also recommended for future maintenance reference. This helps ensure long-term system reliability and easier troubleshooting if needed.
A well-executed installation process ensures stable performance and long service life for reinforced plumbing systems. Careful preparation, precise connection techniques, and proper testing all contribute to a reliable water distribution network in modern building applications.
IFAN factory 30+ years manufacture experience support color /size customization support free sample.Welcome to consult for catalog and free samples.This is our Facebook Website:www.facebook.com.
