PEX pipeline, with its excellent heat resistance, anti-aging and environmental protection properties, has been widely used in pipeline engineering. However, the standard operation during installation directly affects the performance and service life of the pipe. Instructions and precautions for installing PEX pipes are described in detail below.IFAN factory 30+ years manufacture experience support color /size customization support free sample.Welcome to consult for catalog and free samples.This is our Facebook Website:www.facebook.com,Compared with REHOME products, our IFAN products from quality to price are your best choice, welcome to buy!
1. Preparation before installation
Before installing PEX pipes, you need to make adequate preparations. First of all, it is necessary to check whether the model and specification of the pipeline and accessories are in line with the design requirements, and ensure that their quality is qualified. Secondly, prepare the required installation tools, such as cutting tools, flaring tools, connecting tools, etc. Finally, ensure that the installation site is clean and tidy, so as not to affect the installation quality.
2.Installation steps
Cut pipe
Use special cutting tools to cut PEX pipes to ensure that the incision is smooth and burr free. Avoid using saw blades or knives to avoid damaging the inner wall of the pipe.
Flaring and connection
According to the pipe diameter and connection mode, use the flaring tool to flaring the pipe port. The pipes are then joined to the fittings using special connectors to ensure a tight, leak-free connection.
Fixed pipe
In the process of pipeline installation, it should be fixed according to the design requirements. Use a special pipe clamp or bracket to fix the pipe on the wall or ground to ensure that the pipe is stable and does not shake.
3.Precautions
Avoid overbending
PEX pipeline has a certain flexibility, but in the installation process to avoid excessive bending, so as not to damage the pipeline structure, affect the performance.
Prevents scratches and bumps
During the installation process, it is necessary to avoid contact between the pipeline and sharp objects to avoid scratching the surface of the pipeline. At the same time, pay attention to prevent the pipeline from being hit by heavy objects, so as not to cause deformation or rupture.
Keep clean
During the installation process, it is necessary to keep the pipes and accessories clean to avoid impurities entering the inside of the pipes, affecting the water quality and the use effect.
Following the above installation guidelines and precautions can ensure the installation quality and use effect of PEX pipe. At the same time, regular inspection and maintenance of the pipeline system is also an important measure to ensure its long-term stable operation.