Yes, but with precautions Brass Press Fittings can be installed in sub-zero temperatures. However, there are important limitations. Both metal and rubber behave differently in extr
Jul 13, 2026
Visual inspection after crimping After crimping, inspect the Brass Press Fittings visually. There should be clear marks from the jaws. The crimp should be even with no skew. Exampl
Yes, pressure limitations exist Brass Press Fittings have defined pressure limits. Maximum working pressure is specified for each fitting. It depends on diameter and temperature. E
Brass is fully recyclable Brass Press Fittings can be recycled at metal scrap yards. Brass is a valuable and recyclable material. This is an environmentally responsible disposal me
Limited suitability for seawater Brass Press Fittings have limited suitability for seawater systems. Seawater is highly corrosive and contains chlorides. Standard brass corrodes qu
Jul 11, 2026
Service life depends on temperature Brass Press Fittings service life decreases with higher temperatures. At 20°C, they last 50+ years. At 70°C, the lifespan drops signific
No, additional sealing is not required Brass Press Fittings create a watertight seal immediately after crimping. The compressed O-ring provides a complete seal. No pipe dope, tape,
Press fittings are vibration-resistant Brass Press Fittings are highly resistant to vibration. The crimped connection does not loosen over time. It is designed for dynamic conditio
Choosing the wrong pressing jaws The most frequent error is using incorrect jaws. U and TH profiles are not interchangeable. Using the wrong jaws leads to defective crimps. Brass P
Straight couplings for main pipelines Brass Press Fittings in straight coupling form are the most fundamental type. They connect two pipes of identical diameter. Heating systems re
Jul 10, 2026
Cold temperatures harden the brass Brass Press Fittings become less ductile in cold conditions. The metal loses some flexibility at low temperatures. This impairs proper deformatio
Special standards apply to gas systems Brass Press Fittings for gas must meet specific safety standards. Not all press fittings are suitable for gas applications. Gas systems have
