Nowadays, there are more and more household water equipment. Some faucets will leak after a long time and need to be replaced. However, due to a long time, when the faucet is replaced, the joint of the faucet is easily broken and stays in the pipeline.
There are two main ways to take out the broken part of the faucet from the pipe.
The first is that there is a tool on the market to take off the faucet, called the water faucet broken tube extractor. Tap the tool in and turn it out counterclockwise with a small wrench.
However, some pipe joints are very tight, and the broken faucet part cannot be successfully taken out with this method. You can try the second method below. The second is to use a small saw blade to saw two to three small sections on the part stuck in the pipe. The depth of the small section is about the same as the thickness of the wall of the broken faucet (don’t cut too deep, otherwise it will damage the wire opening at the interface.
Then use a small flat-blade screwdriver (a flat-blade screwdriver) to pick out the short cut out, so that the two parts are not stuck so tightly. Finally, use small pointed pliers to clamp out the remaining part
Clean up and replace the new faucet!
