| Product Name | IFAN Stainless Steel Pipe Fittings |
| Size | 1/2'' ~ 2'' |
| Pressure | PN25 |
| Material | Stainless Steel (100% new material) |
| Certificate | CE/ISO9001,etc. |
| Brand | IFAN/OEM/No Brand |
| Sample | Free (Click Here to Contact Us and Get Free Samples) |

Pitting Corrosion on Fitting Surfaces
Pitting corrosion is one of the most frequent issues seen in stainless steel pipe fittings. It appears as tiny holes on metal surfaces, usually triggered by high chloride levels in water or salt exposure. Even quality stainless steel can develop this damage when the protective passive film breaks down. Indoor freshwater systems rarely face this risk, but coastal piping and water with high salt content create favorable conditions. Improper handling that scratches the surface speeds up this local corrosion. IFAN reminds customers to pick the correct material grade for corrosive environments.
Leaks at Connection Joints
Joint leakage happens often and has multiple root causes. For threaded fittings, insufficient tightening or over-torqued threads both create weak sealing points. Press-fit joints may leak due to misaligned pipes, damaged sealing rings or unclean pipe ends before assembly. Many buyers assume leaks come from defective fittings, but poor installation accounts for most joint failures. Regular pressure testing after installation helps catch these issues early before full system operation.
Thread Damage During Assembly
Damaged threads commonly occur when installers force mismatched thread types together. Cross-threading scrapes the thread ridges, ruining the fitting and preventing a tight seal. Over-tightening also cracks thread roots, creating invisible micro fractures. Once threads are damaged, the fitting cannot be reused reliably. Installers should double-check thread standards such as NPT or BSP before screwing parts together and avoid applying excessive force.
Internal Blockage and Flow Restriction
Debris buildup inside fittings reduces fluid flow. Metal shavings, sediment and construction waste left after installation can collect inside elbows, tees and reducers. In hydronic heating loops, trapped particles also wear pump components over time. Smaller bore fittings are especially vulnerable. Complete pipeline flushing after installation removes loose particles and prevents gradual clogging inside the piping network.
Thermal Stress and Deformation
Temperature cycling creates thermal expansion and contraction within piping systems. If fittings are fixed rigidly without expansion allowance, accumulated stress can warp fittings or loosen joints. This problem is typical for heating systems with frequent hot and cold cycles. Installers need to reserve enough space for pipe movement during layout design. Matching fittings to the system temperature range reduces the risk of long-term structural failure.
IFAN factory 30+ years manufacture experience support color /size customization support free sample.Welcome to consult for catalog and free samples.
This is our Facebook Website:www.facebook.com.


