Pipe card:
The pipe clamp is a fixed pipe (commonly known as a saddle card), which is used to fix the ground (note that the ground or the ground with pipelines on the ground cannot be fixed by holes). The live line does not run into the plaster line. The pipe before the ground leveling is also To be fixed.
1. Application scope of pipe clamp
Light series pipe clamps are used for ordinary mechanical pressure pipes of 6 sizes series, the pipe outer diameter is 6-57mm.
Duplex series pipe clamps are used for mechanical pressure pipes of 5 sizes series, the pipe outer diameter is 6-42mm.
Heavy-duty series pipe clamps are used for high mechanical pressure pipes of 8 sizes series, the pipe outer diameter is 8-273mm.
2, pipe clamp material characteristics
density, flexural strength, impact toughness, compression strength, elastic modulus, tensile strength, temperature resistance, color
3, pipe clamp installation procedure
Assemble on the welding plate Before assembling, in order to better determine the direction of the clamp, it is recommended to mark the fixing place first, then weld it, insert the lower half of the pipe clamp body, and put the pipe to be fixed. Then put the other half of the pipe clamp body and cover plate, and tighten with screws. Never directly weld the bottom plate with the pipe clamp installed.
On the ground rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and turn it 90 degrees, insert the lower half of the pipe clamp body into the nut, put the pipe to be fixed, and then put it The upper half of the pipe clamp body and cover plate are fixed with screws.
Fold up assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body, fix it with screws, and pass the anti-loosening cover plate Prevent it from turning. Then install the second pipe clamp in the same way as above.
The assembly of the elbow, when assembling the elbow, it should be directly fixed with Caster pipe clamps at the front and rear of the elbow. It is recommended that such a support point should be a fixed position.
Therefore, there is no difference between the pipe clamp and the pipe clamp. Their purpose is the same, but the product name is different. Some people call it pipe clamp, and some call him pipe clamp.