PE-RT and PE-X performance comparison

Jul 28, 2021

PE-RT and PE-X performance comparison

(1) PE-RT pipe has good flexibility, easy to lay, and economical. During construction, the amount of pipe fittings can be reduced by coiling and bending, thereby reducing the cost; while PE-X has poor resistance to brittleness and is not easy to bend , It is easy to break, so the probability of accidents increases. In order to avoid the occurrence of fracture, the use of mechanical connection of pipe fittings not only takes time, but also increases investment and increases the possibility of leakage.

(2) The stress of PE-RT pipe in the bending part of the pipe can be relaxed quickly, and there will be no "rebound" phenomenon; while PE-X has poor toughness and will generate a lot of stress in the bending part, which is difficult to avoid due to stress concentration. Causes rupture at the bend of the pipe.

(3) PE-RT pipe has a low brittle temperature and good low-temperature resistance. Therefore, it can also be constructed in the case of low temperature in winter, and there is no need to preheat when the pipe is bent. This not only solves the problem that the temperature in the north is too low in winter. Construction problems, and the bending radius can be as small as 5 times the pipe diameter; and if PE-X does not take preheating and insulation measures, the construction is very difficult.

(4) PE-RT pipes can be hot-melt connected to form a completely closed anti-seepage system, which can be buried in the ground.

If the laid pipe is damaged due to construction, it can be repaired with pipe fittings to avoid the waste of the entire pipe; while PE-X pipes can only be mechanically connected with metal pipe fittings and cannot be buried in the ground. Once damaged, the entire pipe must be installed. Pipe replacement.

(5) PE-RT pipe has good environmental adaptability: under the conditions of working temperature of 60 and pressure of 0.4, the pipe can be used safely for more than long-term durability according to standards, DX800 DOWLEX*2344E has passed the sanitary license of FDA and TUV, and the pipe is in production The process does not add any toxic additives, the inner wall is smooth, does not scale, does not breed bacteria, and can be safely used in drinking water transportation and other fields; and PE-X pipes are not suitable for water supply pipeline systems due to their own peculiar smell. .

(6) PE-RT pipe is a green product that can be recycled and reused; while PE-X pipe cannot be recycled and reused. The PE-X pipe has a peculiar smell. If you open the exhaust valve, the peculiar smell will affect your home life.


Send Inquiry