Pipe Melting Machine

Information

Ifan jointing machine, This product is suitable for thermoplastic plastic pipe material such as PP-R, PE, PB connection The company has the following scries of products: BS530835 (600W match Φ20, Φ 25, Φ32 die head), BS530836 (800W match Φ20, Φ25, Φ32, Φ 40, Φ50, Φ63 die head), BS530837(1200W match Φ75, Φ90, Φ110 dic head), BS530838 (double temperature double control type 1500W match Φ20, Φ25, Φ32, Φ40, Φ50, Φ63 die head). This product has the temperature control precision, high reliability, good safety and unique not sticky plastic demoulding technology.

Detail

Connect

The hot melt connection of the plastic pipe connection method is the most reliable, convenient operation, good air tightness, and high interface strength. The PPR plastic pipe connection adopts a hand-held fusion splicer for hot-melt connection.

Before connecting, clean up the dust and foreign matter on the plastic pipes and accessories. When the machine's red light is on and stable, align the pipes (pieces) to be connected with DN<50, the hot melt depth is 1-2MM, and DN<110, the hot melt depth is 2-4MM. When connecting, insert the tube end into the heating jacket without rotating to reach a predetermined depth. At the same time, push the tube to the heating head without rotation to heat. After the heating time is reached, immediately remove the tube and tube from the heating jacket and the heating head at the same time, and insert it to the required depth quickly and evenly without rotation. A uniform flange is formed at the joint. During the specified heating time, the newly welded joint can be calibrated, but rotation is strictly prohibited. When heating plastic pipes and pipe fittings, prevent excessive heating and make the thickness thinner. The plastic pipe is deformed in the pipe fitting. It is strictly forbidden to rotate during hot melt intubation and calibration. There should be no open flame at the operation site, and it is strictly forbidden to bake plastic pipes with an open flame. When aligning the heated plastic pipe and pipe fittings vertically, use light force to prevent the elbow from bending. After the connection is completed, the pipes and fittings must be held tightly to maintain sufficient cooling time, and the hands can be released after cooling to a certain extent.

When PP-R plastic pipes are connected to metal pipe fittings, PP-R plastic pipes with metal inserts should be used as a transition. The pipe fittings and PP-R pipes are connected by hot-melt sockets, and are connected with metal pipe fittings or sanitary ware hardware. When connecting the fittings, use threaded connection, and it is advisable to use polypropylene raw material tape as the sealing filler. If the faucet is connected to the mop pool, install a female elbow (threaded inside) on the end of the PPR plastic pipe. Do not use excessive force during the pipeline installation process, so as not to damage the threaded fittings and cause leakage at the connection. Plastic pipe cutting can also use special pipe cutting: the bayonet of the pipe scissors should be adjusted to the diameter of the pipe to be cut, and the force should be evenly applied when rotating and cutting. After cutting, the fracture should be rounded with a matching rounder. When the pipe is broken, the section should be perpendicular to the pipe axis without burrs.

Image

More set

Hot Tags: pipe melting machine, China, suppliers, manufacturers, factory, customized, bulk, pricelist, for sale, free sample, made in China